A straight wall
for a curved body.
15 mm plywood uprights and roof beams CNC-cut according to the curved bodywork of the panel van. Numbered parts arrive by courier; you assemble them, screw on the cladding, and the furniture fits against a flat wall.
The hardest part of a campervan is solved right from the start.
The walls of a panel van have varying curves at every point. Instead of days spent measuring and cutting battens, you install a ready-made skeleton cut to your vehicle's cross-section.
Curved sheet metal, flat surface
Studs are cut to match the van's cross-section. Cladding and furniture sit on a flat plane without struggling with the sheet metal's curves.
Cabinets attach to battens, not sheet metal
Attaches to upper cabinets, shelves, and furniture frame strips. No need to drill sheet metal for every connection.
Separate for each length and height
Each L and H variant is designed separately. The wheel arch and sliding door opening are taken into account.
Numbered parts with illustrated assembly
Model-specific installation page: layout plan, station dimensions, parts and trim list. It is clear which part goes where.
Interior in three steps
Frame installation
The studs, battens, and ceiling beams fit into place.
Cladding is screwed on
Wall and ceiling panels are screwed onto the battens.
Furniture fits in
Bed, kitchen and overhead cabinets fit against a flat wall.
In real Sprinter scanning, step by step.
First the interior frame, then cladding, and finally the furniture. The video shows how the cabinet doors attach to the battens behind the cladding.
Choose your vehicle
L indicates length, H indicates roof height. Click a variant; the image, dimensions, and price button update accordingly.
Fiat Ducato
Same body: Peugeot Boxer · Citroën Jumper
- Floor length
- 2.670 mm
- Floor width
- 1.870 mm
- Interior height
- 1.635 mm
- Stud sequence
- 6 station
Mercedes Sprinter W906
Same body: VW Crafter 2007–2017
- Floor length
- 2.593 mm
- Floor width
- 1.766 mm
- Interior height
- 1.936 mm
- Stud sequence
- 6 station
Mercedes Sprinter W903
- Floor length
- 2.515 mm
- Floor width
- 1.705 mm
- Interior height
- 1.885 mm
- Stud sequence
- 7 station
Volkswagen Crafter
Same body: MAN TGE
- Floor length
- 3.168 mm
- Floor width
- 1.767 mm
- Interior height
- 1.983 mm
- Stud sequence
- 9 station
Volkswagen Transporter T5 / T6
- Floor length
- 2.861 mm
- Floor width
- 1.570 mm
- Interior height
- 1.900 mm
- Stud sequence
- 7 station
Renault Master III
Same body: Nissan NV400 · Opel Movano B
- Floor length
- 3.083 mm
- Floor width
- 1.765 mm
- Interior height
- 1.916 mm
- Stud sequence
- 7 station
Renault Master IV
- Floor length
- 3.855 mm
- Floor width
- 1.789 mm
- Interior height
- 1.882 mm
- Stud sequence
- 10 station
Ford Transit
- Floor length
- 3.044 mm
- Floor width
- 1.763 mm
- Interior height
- 1.910 mm
- Stud sequence
- 10 station
Iveco Daily
- Floor length
- 3.130 mm
- Floor width
- 1.740 mm
- Interior height
- 1.941 mm
- Stud sequence
- 6 station
Not sure which variant you need?
Send your vehicle's make, model, year, and length from the registration document, and we'll find the right kit together.
Kit contents
- CNC-cut 15 mm plywood studs. At each station, left and right, according to the body cross-section.
- Ceiling beams. On H2 and higher models.
- Part numbers. Each part corresponds to its code on the installation page.
- Model-specific installation page. Layout plan, station dimensions, parts and trim list.
Exclusions from the kit
Cladding panels, insulation, and furniture are not included in the kit. You can install your own design on top of the frame or complete it with our modular furniture sets.
Modular furniture setsHow to order?
Choose your vehicle
Find your brand, model, and L/H variant from the list.
Write on WhatsApp
Press the button and a ready-made message for your selected model will arrive via WhatsApp.
Price and confirmation
We will confirm your vehicle and provide the price and delivery time.
CNC cutting and shipping
Parts are cut, numbered, and shipped via courier.
FAQs
Available for Peugeot Boxer or Citroën Jumper too?
Yes. Boxer and Jumper share the same body with Fiat Ducato; the same length and height Ducato kit is used.
I have a VW Crafter, MAN TGE, Nissan NV400 or Opel Movano.
The 2007–2017 VW Crafter uses the Sprinter W906 kit. The post-2017 Crafter shares a dedicated kit with the MAN TGE. The NV400 and Movano B use the Renault Master III kit.
Can I install it myself?
The kit is designed for DIY builders and workshops. Parts are numbered; model-specific installation pages show the location and dimensions of each part.
Is cladding and furniture included?
No, the kit includes the frame. You can apply the cladding and furniture yourself or with our modular furniture sets you can complete.
My vehicle isn't listed, what should I do?
Send the vehicle's brand, model, year and length via WhatsApp. We'll tell you if there's a ready kit; otherwise, we'll look at options together.
Enter your vehicle details, and we'll send you a price.
Send your brand, model, year, and L/H variant via WhatsApp. We will provide the kit price and delivery time.
