Vestavan Pod · Removable camping module

With your work van
go camping.

Add a kitchen, face-to-face seating and a bed to your panel van for the weekend. Remove the two modules when you return and use your load space again.

Fiat Ducato L3H2 · Mercedes-Benz Sprinter L2H2

Vestavan Pod face-to-face seating layout, viewed through the rear doors of the Ducato
Fiat Ducato L3H2 · 3D product animation

From load space to camping setup

Ducato L3H2 için hazırladığımız 48 saniyelik Türkçe animasyonda iki modülün nasıl yüklendiğini, oturma alanının yatağa dönüşmesini ve sökümü izleyin.

3D installation and removal demonstration. In the film, the blocks are moved using the workshop’s roller loading stand. Loading stand and loading options.
  1. Load the modules

    First, the kitchen module is positioned by the sliding door, followed by the seating module in front of the rear doors.

  2. Set up the dining area and bed

    Unfold the seating area. At night, lower the table to seat height and position the infill slats and cushions.

  3. Reclaim your load space

    Fold away the upper cabinets and side sections. Remove the rear seating module first, then the kitchen.

Take a closer look at the camping setup

Vestavan Pod seating layout in a Ducato beside trees, with the rear doors open

Open the rear doors to the view

Make your coffee beside the sliding door. Sit at the table facing the rear doors and turn the same space into a bed when evening comes.

The images show the product’s 3D design and layout in use.

Choose the Vestavan Pod for your vehicle

The kitchen and seating modules for the Fiat Ducato L3H2 and Mercedes-Benz Sprinter L2H2 were designed separately to fit each vehicle’s interior dimensions. Explore the bed layout and folded module dimensions.

Fiat Ducato L3H2

The kitchen stays beside the sliding door. You can reach the sink and worktop through the side door and turn the facing seats by the rear doors into a bed at night.

187 × 182 cm Approximate bed dimensions · length × width

View the Ducato’s technical dimensions
Table top Long × short side87 × 72,6 cm
Worktop Length × maximum depth138,5 × 53,2 cm
Worktop height From the finished floor89,6 cm
Seat cushion depth50 cm
Table height In seating configuration73,5 cm
Folded kitchen module Width × length × height147,2 × 164,3 × 172 cm
Folded seating module Width × length × height137,2 × 190 × 172,1 cm

Dimensions are taken from the 3D design. Folded modules were measured without the stand.

Check compatibility and get a quote for your Ducato
Ducato bed layout. The four cushions cover 187 cm along the vehicle and 182 cm across.
Ducato L3H2 · Four-cushion bed layout

Mercedes-Benz Sprinter L2H2

For W906 and W907 bodies. The factory cab partition stays in place. The kitchen sits behind the partition, with the seating and bed area in front of the rear doors.

187 × 167 cm Approximate bed dimensions · length × width · W907 layout

View the Sprinter W907’s technical dimensions
Table top Long × short side87 × 62 cm
Worktop Length × maximum depth106,3 × 50,6 cm
Worktop height From the finished floor94,6 cm
Rear seating unit body width For loading / unfolded132 / 169 cm
Folded kitchen module Width × length × height133,2 × 108,3 × 172 cm
Folded seating module Width × length × height132 × 190 × 172,1 cm

Ölçüler W907 yerleşiminin 3B tasarımından alınmıştır. Katlı modüller sehpa hariç ölçülmüştür.

Check compatibility and get a quote for your Sprinter
Sprinter W907 bed layout. The four cushions occupy 187 cm lengthwise and 167 cm across the vehicle.
Sprinter L2H2 (W907) · Four-cushion bed layout

What’s in the package?

Included in the package

  • Front kitchen module
  • Rear seating and bed module
  • Sink and rechargeable tap
  • Initial fitting and usage demonstration when collecting from our İzmir workshop

Roller loading stand

The loading stand is not included in the Vestavan Pod package. At the workshop, we use it to load and unload the folded front and rear modules as complete blocks.

Loading without a stand. You can separate the kitchen unit, storage benches and table from the blocks. Two people can load and unload the parts one by one.

The stove and fridge are also not included in the package.

Before you buy

About vehicle compatibility, transport and delivery.

How do we check if it fits my vehicle?

Along with the model year and body type, we check the clear rear door opening, sill height, existing floor covering and suitable securing points. The modules and moving parts are secured before driving.

How much space do the modules take up outside the vehicle?

You can store the kitchen unit, storage benches and table separately. If you plan to store both blocks whole, check the folded module dimensions for your vehicle for reference. These dimensions exclude the loading stand.

Can I see it in my own vehicle in İzmir?

You can book an appointment to collect from our İzmir workshop with your vehicle. During the initial fitting, we show you how the module is loaded, unfolded and removed.

How do quotes and delivery work within Türkiye?

Send us your vehicle details and city. We’ll share a suitable layout, a quote in TL and delivery options in writing.

Karavan Ustası · İzmir Workshop

Get a quote in TL for your vehicle

Share your vehicle details. Let’s work out the right layout and delivery options together.

Izmir workshop +90 532 131 35 20